Removing The Split Bench Seat - Pontiac Aztek 2003 Owner's Manual

To fold the seatback forward lift up on the recliner lever
and fold the seatback forward. The seatback will lock
into place.
Lift up on the lever again to raise the seatback. The
seatback will lock into place when you push it back to
the upright position.
After raising a seatback to an upright position, push and
pull on the seatback to check that it is locked upright.

Removing the Split Bench Seat

Each section of the split bench seat can be flipped
forward or removed individually.
1. Unlatch the shoulder belt from the lap belt.
2. Make sure the seatback is in the upright position.
3. Lift the seatback recliner lever to fold the seatback
forward.
4. Pull the lever, located at the base on the outboard
side of the seat, to release the rear latches from the
floor pins and flip the seat forward.
The seat can stay in this position or it can be
removed from the vehicle by following the next
steps.
1-7