Table of Contents
Advertisement
3. Count the number of chimes you hear. The number
of chimes indicates the vehicle's current
programmed mode. If you do not wish to change
the current mode, you can either exit the
programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.
4. Press UNLOCK on the remote keyless entry
transmitter to change the current mode.
5. Press UNLOCK on the remote keyless entry
transmitter until you hear the number of chimes
corresponding to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Remote Lock and Unlock
Confirmation
This feature allows you to customize the feedback
received when locking or unlocking your vehicle with the
remote keyless entry transmitter.
2-50
Programmable Modes
Mode 1: Both Features Off (Remote lock and unlock
confirmation are disabled.)
Mode 2: Exterior Lamps Flash Only
•
When you use the remote keyless entry transmitter
to lock or unlock your vehicle, your headlamps and
parking lamps will flash briefly to let you know
the command has been received.
Mode 3: Exterior Lamps Flash and Horn Sound
•
When you use the remote keyless entry transmitter
to lock your vehicle, your headlamps and parking
lamps will flash briefly on each press and your horn
will sound briefly on the second or any other
press to let you know the command has been
received.
•
When you use the remote keyless entry transmitter
to unlock your vehicle, your headlamps and parking
lamps will flash briefly to let you know the
command has been received.
Advertisement
Chapters
Table of Contents
