Adjusting Air Pressure; Loading Nails - Hitachi NT 65M2 (S) Instruction And Safety Manual

English

ADJUSTING AIR PRESSURE

Adjust the air pressure at recommended operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 –
2
8.5 kgf/cm ) according to the length of nails and the hardness of workpiece.
The correct air pressure is the lowest pressure which will do the job. Using the Nailer at a
higher than required air pressure unnecessarily over stresses the Nailer.

LOADING NAILS

● When loading nails into Nailer,
1) do not pull trigger;
2) do not depress push lever; and
3) keep Nailer pointed downward.
(1) Pull the nail feeder back.
(2) Pull the nail feeder until the concave portion of the magazine cover clicks.
16
WARNING
WARNING
Magazine cover
● Do not exceed 120 psi
(8.3 bar 8.5 kgf/cm
Nail feeder
Concave portion
Nail feeder
2 ).