Jabra ELECTRONIC HOOK SWITCH M5390 Setup Manual page 8

Electronic Hook Switch (EHS) Solutions for Siemens
SupportEd SIEMENS Ip phoNES
OpenStage 40/60/80
OptiPoint 500 Basic/Std/Adv/Eco.
Jabra DHSG cable for Siemens
Jabra GN9350/
Jabra GN9350e
SEE THE LAST PAGE FOR ORDER INFO
For more information visit www.jabra.com/siemens
Plus OptiPoint 600
OptiPoint 410/420 Std/Adv
OR
Jabra GN9120 EHS/
Jabra GN9125 EHS
SEtup INForMatIoN
To connect your Siemens phone and Jabra headset with the DHSG cable, just follow these
simple steps:
Setting up the Siemens Ip phone
1. Plug the single end of the Y cable in the headset socket on the phone's acoustic adaptor
2. Connect the large plug in the other end to the AUX port on the headset base
3. Plug the smaller RJ11 in the normal phone socket on the headset base
Setting up the Jabra GN9350/GN9350e
headset
1. Open up the cover on the base unit.
2. On the LCD display, arrow over to the
handset picture and select it.
3. Arrow down to the DHSG mode and
select it by pressing the okay button.
4. Set Dial tone selector in position "A".
Dial tone
<
selector 4/ 1 2
3/ 1 2
OLI AUX
Jabra GN9350/
Jabra GN9350e
regional sales contacts:
Americas: Bill Orlansky, borlansky@gn.com
EMEA: Norbert Lohwieser, nlohwieser@GN.com
APAC: Mike Powrie, mpowrie@gn.com
Setting up the Jabra GN9120/GN9125 EhS
headset
1. Set the headset to the DHSG setting
by keeping the headset in the charge
stand and hold plus and minus in for
6 seconds until the red light on the
headset flashes rapidly.
2. Scroll through the three different
settings using plus and minus and set
to the lips icon. Leave for 15 seconds
until the unit has set itself and is
ready to go!
RHL DHSG AEI
Volume button
Link icon
Mute icon
Charge icon
8