Jabra ELECTRONIC HOOK SWITCH M5390 Setup Manual page 7

Electronic Hook Switch (EHS) Solutions for Polycom
SupportEd polyCoM Ip phoNES
SoundPoint ® IP 650 phone SoundPoint
SoundPoint
SoundPoint ® IP 430 phone
phone
* (2.5MM adapter is required for 320/330 models. Part No. 8800-00-75)
Jabra EHS Adapter for Polycom
You must be running SIP application version 3.0 or later and BootRom 4.1.0 or later
Jabra GN9350/
Jabra GN9350e
SEE THE LAST PAGE FOR ORDER INFO
For more information visit www.jabra.com/polycom
® IP 560 phone SoundPoint ® IP 550 phone
IP 320/330* SoundPoint IP 670
® ®
phone
OR
Jabra GN9120 EHS/
Jabra GN9125 EHS
SEtup INForMatIoN
To connect your Polycom phone and Jabra headset with the EHS Adapter, just follow these
simple steps:
Setting up the polycom phone
1. Press "Menu".
2. Select Settings>Basic>Preferences>Head-set>Analog Headset Mode.
3. Use the up and down arrow keys to select Jabra Mode, then press the Select soft key.
4. Press "Menu" or the exit soft key to return to the idle display.
Setting up the headset – Attaching a supported headset
1. On the back of the SoundPoint IP Phone, plug one end of the adapter into the serial port.
2. Plug the other end into the AUX port on the headset base unit.
3. Plug the audio cord into the headset jack in the SoundPoint Phone (2.5MM adapter is
required for 320/330 models) and the telephone jack on the Jabra base unit.
Setting up the Jabra GN9350/GN9350e
headset
1. Open up the cover on the base unit.
2. On the LCD display, arrow over to the
handset picture and select it.
3. Arrow down to the DHSG mode and
select it by pressing the okay button.
4. Set Dial tone selector in position "A".
Dial tone
<
selector 4/ 1 2
3/ 1 2
OLI AUX
Jabra GN9350/
Jabra GN9350e
regional sales contacts:
Americas: Bill Orlansky, borlansky@gn.com
EMEA: Norbert Lohwieser, nlohwieser@GN.com
APAC: Mike Powrie, mpowrie@gn.com
Setting up the Jabra GN9120/GN9125 EhS
headset
1. Set the headset to the DHSG setting
by keeping the headset in the charge
stand and hold plus and minus in for
6 seconds until the red light on the
headset flashes rapidly.
2. Scroll through the three different
settings using plus and minus and set
to the lips icon. Leave for 15 seconds
until the unit has set itself and is
ready to go!
RHL DHSG AEI
Volume button
Link icon
Mute icon
Charge icon
7