Fuji Xerox DocuPrint P255 d User Manual page 166

• WPS Setup (DocuPrint P255 dw only)
Push PBC Start
Button
Control
PIN Code Start
Configuration
Print PIN Code
* Factory default menu setting
NOTE:
• This menu item appears only when the printer is connected to a wireless network.
• Reset Wi-Fi (DocuPrint P255 dw only)
Purpose:
To initialize wireless network settings. Enabling this feature and rebooting the printer will reset all the
wireless settings to their factory default settings.
Values:
No*
Yes
* Factory default menu setting
NOTE:
• This menu item appears only when the printer is connected to a wireless network.
• TCP/IP
Purpose:
To configure TCP/IP settings. To make any changes effective, turn off the printer and then turn it back
on.
Values:
IP Mode
IPv4
* Factory default menu setting
NOTE:
• To configure the IPv6 settings, use the CentreWare Internet Services.
166 Using the Operator Panel Menus
Cancel*
Start
Starts configuring wireless network settings using the PIN code
assigned automatically by the printer.
Prints the PIN code to be entered on the computer for the WPS
encryption setup.
Does not reset the wireless setting.
Resets the wireless setting.
Dual Stack*
IPv4
Get IP DHCP/AutoIP*
Address
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Gateway Address
Disables the PBC method for the WPS encryption.
Enables the PBC method for the WPS encryption.
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Automatically sets the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enter the IP address on the operator panel.
Enter the IP address allocated to the printer.
Enter the subnet mask.
Enter the gateway address.