Fuji Xerox DocuPrint P255 d User Manual page 106

8
Select FX DocuPrint P255 xxx from the Model menu, and then click Add Printer.
The setup is complete.
You can optionally specify the default options settings of the printer.
• For SUSE Linux Enterprise Desktop 11 (x86)
1
Select Computer  More Applications..., and then select YaST on the Application Browser.
2
Enter the administrator password.
YaST Control Center is activated.
3
Select Hardware on YaST Control Center, and then select Printer.
The Printer Configurations dialog box appears.
4
Select either of the following according to the type of your printer connection.
For a network printer:
Click Add.
a
The Add New Printer Configuration dialog box appears.
Click Connection Wizard.
b
The Connection Wizard dialog box appears.
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or Printserver
c
Box via.
Enter the IP address of the printer in IP Address or Host Name:.
d
Select Fuji Xerox in Select the printer manufacturer:.
e
Click OK.
f
The Add New Printer Configuration dialog box appears.
Select FX DocuPrint P255 x vx.x [FujiXerox/FX-DocuPrint-P255-x.ppd.gz] from the
g
Assign Driver list.
NOTE:
• You can specify the printer
For a USB printer connected to a computer running the SUSE Linux Enterprise Desktop 11:
Click Add.
a
The Add New Printer Configuration dialog box appears.
The printer name is displayed in the Determine Connection list.
Select FX DocuPrint P255 x vx.x [FujiXerox/FX-DocuPrint-P255-x.ppd.gz] from the
b
Assign Driver list.
NOTE:
• You can specify the printer name in Set Name:.
5
Confirm the settings, and then click OK.
106 Printer Connection and Software Installation
name in .
Set Name: