Switching On - Miele KM 2014 Operating And Installation Instructions

Switching on

^ The control for the burner required
must be pressed in and turned
anti-clockwise to the largest flame
symbol to switch on.
^ When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let it go.
^ If the flame goes out prematurely,
turn the control to "ß". Wait for at least
one minute before trying again. If
necessary keep the control pressed
in for longer.
^ If the burner does not ignite the
second time, turn the control to "ß",
and see "Problem solving guide".
In the event of a power cut
If there is an interruption to the
electricity supply the gas can be
ignited with a match.
^ Press in the relevant control and turn
it anti-clockwise to the largest flame
symbol.
^ Hold the control pressed in and light
the gas at the burner with a match.
Keep the control pressed in for a further
8-10 seconds and then release it.
Operation
21