Table of Contents
Advertisement
Drop impact/damage
p p Handle this product with care because this product is precision equipment. Do not apply
impact on this product, drop this product, or put a heavy object on this product.
p p Do not damage the scanner reading portion.
System operation
p p Be sure to turn off the power before battery pack replacement.
How to care
p p Be sure to turn off the power before taking care of this product.
p p Use a dry soft cloth to remove dirt from this product. When stubborn stains are
observed, use a tightly twisted water soaked cloth to wipe the point softly and use dry
another cloth to wipe the point again.
p p Do not use thinner, benzene, wax, kerosene, soap, polish, hot water, chemical cloth,
and the like.
p p Use a dry soft cloth to clean the scanner reading portion depending on the level of dirt.
p p The dirty reading portion may cause barcode reading failure.
p p When the scanner is cleaned, the wiping direction shall be vertical to the scanner
reading portion.
p p The dirty connector may cause communication failure.
p p Use a dry soft cloth to clean the power feeding terminal depending on the level of dirt.
p p The dirty terminal may cause failure in charging the mobile terminal.
Touch panel
p p Use a finger or the supplied touch pen to enter data on the touch panel. Do not apply
excessive load to the touch panel. Do not use a sharp-pointed hard object (ex. ballpoint
pen and mechanical pencil) to operate the touch panel.
7
Advertisement
Table of Contents
