Specific Safety Rules - Chicago Electric 41983 Operation Instructions Manual

1. use clamps (not included) or other practical ways to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body is unstable and may
lead to loss of control.
Do not force the tool. use the correct tool for your application.
2.
do the job better and safer at the rate for which it is designed. Do not force the tool and do
not use the tool for a purpose for which it is not intended.
Do not use the power tool if the power Switch does not turn it on or off.
3.
cannot be controlled with the Power Switch is dangerous and must be replaced.
4. Disconnect the power cord plug from the power source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures reduce the
risk of starting the tool accidentally. Always unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
Store idle tools out of reach of children and other untrained persons.
5.
dangerous in the hands of untrained users.
Maintain tools with care. keep cutting tools sharp and clean.
6.
tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use
a damaged tool. Tag damaged tools "Do not use" until repaired.
7. check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. if damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
use only accessories that are recommended by the manufacturer for your model.
8.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Tool service must be performed only by qualified repair personnel.
1.
maintenance performed by unqualified personnel could result in a risk of injury.
when servicing a tool, use only identical replacement parts. follow instructions in the
2.
"Inspection, Maintenance, And Cleaning" section of this manual. Use of unauthorized
parts or failure to follow maintenance instructions may create a risk of electric shock or
injury.
Hold tools by insulated gripping surfaces when performing an operation where the
1.
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
2. wear ear protectors when using the tool for extended periods.
high intensity noise can cause hearing loss.
Maintain labels and nameplates on the tool.
3.
unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment.
4.
workspace. Do not use this product in a damp or wet location.
for technical questions, please call 1-800-444-3353.
SKU 41983
TOOl uSE AnD cARE
SERVicE

SpEcific SAfETY RulES

These carry important information. If
Make sure there is adequate surrounding
The correct tool will
Any tool that
Tools are
Properly maintained
Service or
Prolonged exposure to
Page 4