Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thiS manual.
Advertisement
Table of Contents
Related Manuals for Chicago Electric ITEM 69276
Summary of Contents for Chicago Electric ITEM 69276
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69276... - Page 3 A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69276 For technical questions, please call 1-800-444-3353. Page 3...
-
Page 4: Rotary Hammer Safety Warnings
• Any power cord must be properly 7. avoid unintentional starting. grounded. Ground Fault Circuit Interrupter Prepare to begin work before turning on the tool. (GFCI) should also be implemented – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-800-444-3353. Item 69276... - Page 5 If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SaVE thESE inStRuCtiOnS. Item 69276 For technical questions, please call 1-800-444-3353. Page 5...
- Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-800-444-3353. Item 69276...
- Page 7 Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 69276 For technical questions, please call 1-800-444-3353. Page 7...
-
Page 8: Specifications
Parts List and Diagram on page 14. Functions Lock Button (S-103) Trigger Lock Forward/Reverse Button (74) Depth Gauge (S-107) Auxiliary Handle (S-108) Chuck (3) Function Dial (85) Trigger (75) Figure a Page 8 For technical questions, please call 1-800-444-3353. Item 69276... -
Page 9: Operation
Hammer/Drill setting. The Rotary Hammer Figure C will revolve and hammer when powered. 4. To Chisel: Rotate the Function Dial to the Hammer setting. The Rotary Hammer will hammer when powered. Item 69276 For technical questions, please call 1-800-444-3353. Page 9... - Page 10 8. When finished, to prevent accidents, turn off the tool and disconnect its power supply after use. Allow the bit to cool then remove it from the Chuck. Clean, then store the tool indoors out of children’s reach. Page 10 For technical questions, please call 1-800-444-3353. Item 69276...
-
Page 11: Maintenance
WaRninG! if the supply cord of this parts, damaged electrical wiring, and any other power tool is damaged, it must be replaced condition that may affect its safe operation. only by a qualified service technician. Item 69276 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Troubleshooting
See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-800-444-3353. Item 69276... - Page 13 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 69276 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Parts List And Diagram
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 69276... - Page 15 Diagram Item 69276 For technical questions, please call 1-800-444-3353. Page 15...
-
Page 16: Warranty
limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.