Installer Setting - Celsius/Fahrenheit - LG PQRCVCL0Q Owners & Installation Manual

Installation instruction
Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
FAN
SPEED
TEMP
• Whenever press temp up(s), down(t) button in Fahrenheit mode, the temperature will
increase/drop 2 degrees.
16 Wired Remote Controller
1
2
OPER
MODE
3
4
When pressing the
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting
mode, select the ceiling height setting code
value by pressing the oper-mode button.
* Celsius/Fahrenheit setting code value : 07
Select the desired setting value with the
temperature up(▲), down(▼) button.
When pressing
established celsius/Fahrenheit setting
value will be set up.
When pressing the
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be released.
- If there isn't any button input for more than
25 seconds, the installer setting mode will
also be released.
OPER
button and
MODE
*Setting value
00:Celsius
01:Fahrenheit
Code value
Value
button, currently
OPER
button and
MODE