Installer Setting-Celsius/Fahrenheit Switching - LG PQRCUSA1 Owners & Installation Manual

Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
❊
Whenever press
degrees.
1
2
3
4
5
button in Fahrenheit mode, the temperature will increase/drop 2
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
Repeat pressing
Function code 12.
Function Code
Ex) Fahrengeit Setting
Select Temperature unit mode by
pressing button.
(00: Celsius, 01: Fahrenheit)
Press button to save or release.
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
Owner's & Installation Manual 21
Installation instruction
button to select
conversion mode value