Installer Setting-Celsius/Fahrenheit Switching; Installer Setting-Zone Type Setting - LG PQRCUSA0 Owners & Installation Manual

Installation instruction
Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
❊
Whenever press button in Fahrenheit mode, the temperature will increase/drop 2
degrees.
22 Wide Wired Remote Controller
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing button to select
Function code 12.
Function Code conversion mode value
Ex) Fahrengeit Setting
3 Select Temperature unit mode by
pressing button.
(00: Celsius, 01: Fahrenheit)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.

Installer Setting-Zone Type Setting

This function is only available on some products.
It is possible to setup zone new type or old one of the product which is available to install the damper
controller.
CAUTION
If you set zone number incorrectly, the product may malfunction especially in zone control.
This function must carried out by a certificated-technician.
Installation instruction
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing button to select
Function code 13.
Function Code Zone type value
Ex) Setting the Zone Type as "New"
3
Select Zone Type by pressing
button
(00:Old, 01:New)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.
Owner's & Installation Manual 23