Clifford 3806X Owner's Manual page 30

To arm VRS, perform the silent arm command while driving, or while
the ignition is turned on. The siren chirps and parking lights flash
once to confirm arming. The Arm LED and beeps play to confirm VRS
activation.
If Valet mode is on, a fault tone will play indicating that VRS is not
available. Exit Valet mode to re-enable the VRS mode.
Once armed, VRS triggers if any door is opened then closed while
the ignition remains on, and if the vehicle is parked while armed, VRS
triggers when driving resumes. See trigger description below.
When triggered, the control center LED begins flashing after fifteen
seconds. Within 45 seconds perform the silent disarm command to
disarm VRS. If not disarmed, the siren begins chirping for 60 seconds
and then becomes a constant siren blast with flashing parking lights
for several minutes. This output will continue and be repeated each
time the ignition is turned on until VRS is disarmed.
To disarm, perform the silent disarm command anytime before VRS has
been triggered, or within one minute after it has been triggered and
before the the siren begins to chirp. If not disarmed before the siren
begins to chirp, the emergency override procedure must be used to
disarm VRS.
27
© 2014 Directed. All rights reserved.