Sensor Adjust - Clifford 3806X Owner's Manual

Prepare the vehicle system for pairing:
1. Open at least one of the vehicle's doors.
2. Turn the key to the ON position.
3. Within five seconds press and release the Control Button on the
Control Center one time.
4. Within five seconds, press and hold the Control Button. The
status LED will begin flashing and the siren will sound one time
to confirm the system is ready for pairing.
5. Release the control button.
6. Press the
2-way remote will emit sounds to confirm pairing. The 1 way
remote will not emit sounds the only confirmation will be from
the siren.
7. To exit the pairing mode on the remote, press the
once and then press and hold again, the transmit LED will shut
off to confirm exiting.
Pairing on the system will exit if:
• The open door is closed.
• The ignition is turned off.
• There is no activity for 60 seconds.
• The control button is pressed too many times.

Sensor Adjust

To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed Dealer performs all sensor adjustments.
© 2014 Directed. All rights reserved.
button on the remote. The siren will sound and the
button
19