Table of Contents
Advertisement
1. Route the child safety seat tether strap over the back of the seat.
For outboard seating positions, route the tether strap under the head
restraint and between the head restraint posts. For the center seating
positions, route the tether strap over the top of the head restraint.
If needed, the head restraints can also be removed.
4. Tighten the child safety seat tether strap according to the
manufacturer's instructions.
If your child restraint system is equipped with a tether strap, and the
child restraint manufacturer recommends its use, Ford also recommends
its use.
2014 Edge (edg)
Owners Guide gf, 2nd Printing, March 2014
USA (fus)
Child Safety
2. Locate the correct anchor behind
the gap cover for the selected
seating position.
3. Pull the gap cover to expose the
anchors. Clip the tether strap to the
anchor as shown.
31
Advertisement
Table of Contents
