Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp Aquos LC-13B4M Operation Manual

PRESET

On-Screen Display Language Selection

Upper control panel
VOL CH MENU
2 PRESET
3
* In this example, the LC-20B4M
model is used. Refer to page 7
if you are using the LC-13B4M
and LC-15B4M models.

Presetting the Channels (AUTO)

Upper control panel
VOL CH MENU
2 PRESET
2
BRIGHT TEXT
POWER TV/ VIDEO
T
SUBPAGE REVEAL
HOLD SUBPAGE
SUBTITLE END
E
MENU MENU
MPX OK
SOUND MENU
M
MENU
VOL CH CH
TV/VIDEO
SLEEP DIS.MODE
I MENU on the LCD TV set can also
be used to select the language.
1
TV/VIDEO
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
1
more than 2 seconds to display the
PRESET mode screen.
1,2,4
2
Press MENU (PRESET-1) twice
to display the LANGUAGE select
mode screen. Press MENU
(PRESET-1) again to change the
PRESET mode as shown below.
AUTO → MANUAL → LANGUAGE →
Note:
• Instead of pressing MENU for more than
2 seconds, you can display the
LANGUAGE select mode by selecting
FEATURE → LANGUAGE on the
Menu screen.
3
Press CH (
language you wish to display.
4
Press MENU (PRESET-1) to
return to the normal screen.
I Automatically tunes in and presets
receivable TV stations.
TV/VIDEO
Make sure the antenna cable is
properly connected.
1
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
1
more than two seconds. The
AUTO mode screen appears.
2
Press VOL (–)/(+) (PRESET-2)
on the upper part of the LCD TV
set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3
The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
Note:
• When starting PRESET after setting the
SOUND SYSTEM with MENU of the
Remote Control, the SOUND SYSTEM
for all channels are stored into memory.
• Unused channels are automatically
skipped.
• The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
NORMAL
SCREEN
)/( ) to select the
ENGLISH
SELECT: EXIT:
(Auto mode screen)
Sound System
MENU
15