Quiet Detect Start Time - Sharp UX-P410 User Manual

Quiet Detect Start Time

This setting can be used to delay the start of the Quiet Detect Time function.
For example, if you want to insert a pause at the beginning of your answering
machine's outgoing message to ensure clear detection of fax signals, you can
use this setting to delay the start of silence detection so that the pause will not
cause the fax to take over the line.
Quiet Detect Start Timing has been turned off at the factory. If you want to use
this function, turn it on by entering a 2-digit number equal to the desired
number of seconds of the delay. As general guide, the delay time should be
slightly longer than the pause before the outgoing message.
1
FUNKTION
Press
2
Press once and
3
Press once.
4
Enter a 2-digit number (from 01 to 15)
for the number of seconds of the delay,
or enter 00 to turn off the function.
Example: 5 seconds
5 STOP
Press
once and once.
5 times.
0 5
to return to the date and time display.
Optional A.M. Mode Settings
Display:
OPTION SETTING
QUIET START
ENTER (00-15) 00
The display briefly shows
your selection, then:
ON A.M. FAILURE
57