Front Display Settings - Topfield SRP-2100 User Manual

46 Preference Settings

4.8 Front Display Settings

desire. Its available range is
set the option, the lower the information box will be positioned.
To use an animation effect when changing menu, set the Ani-
mation option to Enable.
To use the service name scrolling at the service list screen, set
the Text Scroll option to Full Scroll or Part Scroll. If you set this
option to Full Scroll, a service name will be fully scrolled. If
you set this option to Part Scroll, a service name will be scrolled
only from beginning of the name to end of the name.
If you want to use the front display scrolling continuously, set
the Main Display Scrolling option to Unlimited. Setting it to
Once do the scrolling one time. Set it to Disable not to use the
scrolling.
To display the current time on the sub display of the front
display, set the Sub Display Content option to Time. Otherwise,
set this option to Default to display the name of the upper
menu.
To adjust the brightness of the front display in operation mode,
set the Brightness in Operation Mode option as you desire.
10 to 3 lines. The higher you
To adjust the front display re-
lated settings, select the Settings
Front Display menu.
You should see a screen like the
left figure.