Adjusting The On-Screen Display - Topfield SRP-2100 User Manual

To record again a scrambled recording file with descrambling
during playback, set the Descramble Mode option to Auto
Recording; otherwise, set this option to Normal.
You can adjust the jump time interval which is used in playback.
Set the Jump Time Interval option as you desire. Its available
range is 10 seconds to 3 minutes.
If you want to use extensional trick mode, set the Trick Mode
Level option to 2x, 4x, 8x, 16x, 32x, 64x; otherwise, set this
option to 4x, 16x, 64x.

4.7 Adjusting the On-Screen Display

To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50
percent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is 1 to
30 seconds. If you set this option to No Infobox, the information
box will not be displayed when you switch services. However,
pressing the
you set this option to Never Hide, the information box will
always be displayed. For the information box, see § 5.2.3.
In addition, you can raise or lower the position of the informa-
tion box. To do that, set the Info Box Position option as you
4.7 Adjusting the On-Screen Display 45
To adjust the On-Screen Display
(OSD) related settings, select the
Settings
You should see a screen like the
left figure.
button will display the information box. If
OSD menu.
4