Stand-Off Guide; Drag Cutting 40 Amp; Gouging With The Powercut 1300/1600 Using The Pt-38 Torch - ESAB PowerCut 1300 Instruction Manual

SECTION 4
WArNINg
4.3

Stand-off guide

4.4

Drag Cutting 40 Amp

4.5

gouging with the PowerCut 1300/1600 using the PT-38 torch

For in depth instructions refer to torch manual for complete maintenance and operation.
DrAg CUTTINg, EVEN WITH LOWEr CUrrENT LEVELS MAY SIgNIfI-
CANTLY rEDUCE THE LIfE Of TOrCH CONSUMABLES. ATTEMPTINg
TO DrAg CUT WITH HIgHEr CUrrENTS grEATEr THAN 40 AMPS
MAY CAUSE IMMEDIATE CATASTrOPHIC CONSUMABLE DAMAgE.
36
OPErATION