Using The Mx Series - AMX MX Series Instruction Manual

Using the MX Series

To operate the series transmitters:
MX
1. To ensure maximum operating range, place the
receiver on a non-metallic surface, away from the
projector.
2. For the unit to operate, the controlled projector
MX
must have its power switch in an
or lamp (see switch D on the installation
LOW HIGH
diagram of your
MX
3. With the transmitter, move away from the projec-
MX
tor and press a pushbutton on the transmitter to test
the receiver.
MX
4
position. Select
ON
receiver).
MX