Open Scan; Setting Scan Resume Condition - Icom IC-440 Instruction Manual

D Setting scan resume condition
q Push and hold
F (Set Mode)
SET
w Push
F * or MONI * several times until "SCN-T" appears.
T SQL
SET
e Push
or to select the scan resume timer.
• 5 : Scan pauses for 5 sec. then resumes.
• 10 : Scan pauses for 10 sec. then resumes.
• 15 : Scan pauses for 15 sec. then resumes.
• P5 : Scan pauses until the signal disappears, then re-
sumes 5 sec. after the signal disappears.
( P5 is recommended for typical use and is the de-
fault setting).
r Push and hold
for 2 sec. to turn the power OFF, or
push and hold F
(Set Mode)
SET
*Regardless of the assigned key function.
[
for 2 sec. to enter set mode.
for 2 sec. to exit set mode.

■ Open scan

Open scan searches for transmitted signals automatically
and makes it easier to locate new stations for contact or lis-
tening purposes.
IMPORTANT!:
Open scan can transmit on a start channel or busy channel.
q Push
O G P several times to select the open
(Scan Mode)
RS
scan. (p. 22)
• " " appears.
Open scan is selected.
w Push
SCAN
to start the open scan.
(Scan)
TAG
e When receiving a signal, scan pauses and resumes accord-
ing to the selected scan resume condition. (see left column)
r Push
SCAN to cancel the scan.
(Scan)
TAG
5
SCAN OPERATION
Appears
Blinks
Scan start channel
5
23