Installation Methods - Icom IC-440 Instruction Manual

1
ACCESSORIES AND CONNECTION
ï Installation methods
<Sample 1: IC-440 is installed under a driver's seat.>
<Sample 2: IC-440 is installed under a dash box, etc.>
Main unit
Main unit
2
D Using the mounting bracket
q
w
e
Microphone
Main unit
Drill 3 holes where the mounting bracket is to be installed.
1
• Approx. 5.5–6 mm ( ⁄ ´´) when using nuts; approx. 2–3 mm
4
1
( ⁄ ´´) when using self-tapping screws.
8
Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
Insert the mounting bracket's rail to the transceiver's slot,
then slide the transceiver to attach with the mounting bracket.
Flat washer
Spring washer
When using
self-tapping screws