Table of Contents
Advertisement
4
SCAN
■ Scanning preparation
D Scan Resume function
1.
Open the "Scan Resume" screen.
[MENU] > Settings > Scan Resume
2.
Push [▲] or [▼] to select a Scan Resume option, and
then push [ENT] to set it.
• 5sec:
• 10sec:
• 15sec:
• 5sec No Signal: Scan pauses until the signal
L Push [CLEAR] to return to the previous screen.
■ Open Scan
The Open Scan automatically searches for transmitted signals and enables you to locate
new stations for communication or listening.
IMPORTANT: The Open Scan can transmit on a start channel or busy channel.
1.
Select "Open Scan" in the "Scan Mode" menu. (p. 11)
• "
" is displayed on the operating screen.
2.
Push [SCAN] to start the Open Scan.
• "
" blinks.
3.
When receiving a signal, the scan pauses and
resumes, according to the selected Scan Resume
function. (pp. 12, 27)
4.
Push [SCAN] to stop the scan.
12
Scan pauses for 5 seconds when a
signal is detected, and then resumes.
Scan pauses for 10 seconds when a
signal is detected, and then resumes.
Scan pauses for 15 seconds when a
signal is detected, and then resumes.
disappears, and then resumes after 5
seconds.
Scan start channel
Advertisement
Table of Contents
