Disassembly & Reassembly
Disassemble the Radio
Remove the Control Head
This chapter explains, step by step, how to disassemble and assemble the radio, to
board level.
1.
Turn the radio upside down.
2.
Insert a small flat blade screw driver, or similar, in the recess
between the control head and the main board.
3.
Press until the side of the control head releases.
4.
Pull the control head away from the main board.
5.
Remove the flat cable from the socket on the radio side.
CONTROL HEAD
Figure 5-1 Control Head Removal
Figure 5-2 Flat Cable Removal
5
5
RECESS (not visible)
Disassembly & Reassembly
5-1