Olympus WS-11 01 Instructions Manual page 6

Changing the Playback Speed (Slow Speed/Fast Speed)
System Sounds (Beep)
The playback speed of the file can be changed between 0.5 and 1.5 times speed in
increments of 0.125. Change the speed according to need such as listening to meeting
content at a fast speed or reviewing spots that you couldn't catch in a language lesson at
a slow speed. The tone will be automatically adjusted digitally without changing the voice
so it sounds natural.
Informs a button operation or a wrong operation of the recorder by
sound. System sounds may be turned off.
In Menu mode IilectIon ... Bee!! OFF, Beep ON
LED (LED)
Change Playback Speed
Prl)SS the@ bullon ... Every
tiln~
the
@
button is
prl)ssed,
while playing a
file.
the playback speed will switch.
[
Normal Speed
~
Slow Speed --+ Fast Speed ]
_ (-25%) (+50%)_
'STt
HQ
@]
t
HI
b
.. 21,<:
F. play
You can set it so the Record/Play indicator light does not turn on.
In Menu mode selection ... LED OFF, LED ON
Even if playback is stopped, the changed playback speed will be retained.
The next playback will be at that speed.
Change Playback Speed Setting
The playback speed setting of "Slow Speed" and "Fast Speed" can be changed from the
menu setting.The setting can be changed either while in stop mode or during playback.
LCD Contrast Adjustment (Contrast)
[I]
Press and hold the
0
(MENU) for 1 second or longer to
go to the mainmenu.
Display contrast can be adjusted in 12 levels.
. You can adjust the LCD dlaplay
In Menu mode selection ... contrast level from 1 to 12.
•
~.
Contrast 06
~
Continuous Playback (All Play)
• To play all the files within the folder, select "All Play ON". When the last file finishes being
played back, "File End" is displayed and playback stops.
e
When the slow playback mode is selected, the
m~
appears and, for the fast playback
mode,
1iI~
appears on the display while the recorder is playing back.
elf
the recorder goes to the menu screen during playback, move the cursor to change
playback sound accordingly.
UB
'0 <5&
Sure? Start
l · · 1
•••••• <'5&
: Format
>1lIIIIJ
Formatting the Recorder (Format)
If you format the recorder, all files will be removed and all function settings will return to
defaults except date and time settings. Transfer any important files to a computer before
formatting the recorder.
rn
Press the
~
button.
After the "Data All Cleared" message is on for 2 seconds,
"Sure? Start" will turn on.
~
Press the
~
o r ' " to select "Format", and press
@.
"~ Cancel" and "Format ~" flashes alternately.
• It may take up to several tens of seconds to finish the initialization. Do not remove the
battery or detach the battery compartment from the recorder during that time. Otherwise
data may be damaged.
• Never format the recorder from a PC.
• When the recorder is formatted, all the stored data, including locked files, are erased.
[II
Press the
@
button.
Formatting begins and "Format DONE" displays when formatting ends.
[I]
The Sub Menu opens.
•
~
Ai
IPlay ON
~
1ST!
HQ ~
~~ b
o
2 L<:
~
Fast Speed
~
~~
Hi
~
... 21,<:
~
xl.·5 play
.~
Setting during
playback
In Menu mode MIectIon ... AIIPley OFF, AIIPlay ON
Also after the playback of the current file, all the files within the folder
can be continuously played back.
~
Press the
~
o r ' " to select "Slow Speed" or "Fast
Speed", and press
@
button.
The setting of "Slow Speed" or "Fast Speed" starts.
rn
Press the
~
o r ' " to select the playback speed to
set, and press
@
button.
.. Slow Speed: xO.5, xO.625, xO.75, xO.875
.. Fast Speed: xl .125, x1.25, x1.375, x1.5
Goes back to the setting screen of "Slow Speed" or
"Fast Speed".
[II
Press the
0
(STOP) button to exit the menu mode.
Locking Files (File Lock)
M ! S U I ! l l H ' ~ ! B l l I l I i I W G d !
_ _
= ""' ' ' ' ' . _' . ...
Of
n"". ..
Viewing System Information (System Ver.)
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from
a folder.
In Menu mode lI8IectIon ... Lock OFF, Lock ON
Erase lock indicator
ISTI
HQ
~~~.
.H1lIIIb
xlm
2
I
,,< :
05m35s OOnOOs
You can check the recorder's information on the menu screen.
...
~"Venlon o
Version: 1.00
-10 - -11 -