Assembly - Husqvarna SpeedMill K750 Operator's Manual And Spare Parts List

Assembling the bevelling bowls to
the SpeedMill.
Bowl Bevelers
Waste/Sewer/Drain 4" to 8" in diameter.
C A U T I O N !
Always install the 8" SpeedMill Bowl (P/N 542 19 61-89)
before using the machine! The 8" SpeedMill Bowl must
always be installed even if the machine will only be used
to cut and bevel smaller diameter pipes. Besides serv-
ing as a beveler for 8" pipes, the 8" flange is also de-
signed to cover the area between the guard and the
flange and to prevent unintentional contact with the
blade.
Mount the beveling bowl in order 8"
first, 6" second, and 4" last.
ALWAYS mount the 8" bowl, it is de-
signed to shield operator in case the
blade breaks.
Install and tighten the 2" (50.8mm)
hub nut with the proper tool. Torque
to 130-215 in-lbs. (15-25 Nm).
NOTE: Do not tighten excessively –
nut will tighten during cutting process
– making disassembly difficult.
When tightening the hub nut, use a
screwdriver to lock the blade shaft in
position. Push the screwdriver into
the slot (see picture) and rotate the
arbor until the screwdriver stops the
rotation. Do not use slots in beveling
bowl to hold, may damage bowls.
8 SpeedMill
ASSEMBLY AND OPERATION
506 11 97-01 for:
Before using the assem-
bled machine, completely
read the power cutter op-
eration manual supplied
with this machine.
Assembling the bevelling ring to the
SpeedMill.
Ring Beveler
506 11 96-01 for:
Sewer/Drain 10" to 36" in diameter.
Supply/Water 4" to 24" in diameter.
Mount the Ring Beveler assembly
onto the hub shaft.
Install and tighten the 2" (50.8mm)
hub nut with the proper tool. Torque
to 130-215 in-lbs. (15-25 Nm).
NOTE: Do not tighten excessively –
nut will tighten during cutting process
– making disassembly difficult.
When tightening the hub nut, use a
screwdriver to lock the blade shaft in
position. Push the screwdriver into
the slot (see picture) and rotate the
arbor until the screwdriver stops the
rotation.
OPERATION:
C A U T I O N !
Before starting machine, make sure
you completely read these instructions
and the power cutter operation manual.
Be familiar with the functions of the
machine before operation!
Before using the assem-
bled machine, completely
read the power cutter op-
eration manual supplied
with this machine.