Assembly - Husqvarna 330iKE Operator's Manual

• Do not put objects into the cooling slots of
the battery charger.
• Do not connect the battery charger
terminals to metal objects as this can short
circuit the battery charger.
• Use approved mains sockets that are not
damaged. Make sure that the cord of
the battery charger is not damaged. If
extension cables are used, make sure that
the extension cables are not damaged.
• Use a residual-current device (RCD)
for increased security. A residual-current
device is fitted to protect operators in case
an electrical fault should occur.
• Use approved wall sockets that are not
damaged.
• Regularly examine that the power cord
is not damaged. Immediately disconnect
the battery charger if the power cord is
damaged.
• If the power cord is damaged replace the
power cord.
• Keep the battery charger away from
children.
• Do not use a battery charger that is
damaged or does not operate correctly.
• Do not use the battery charger when there
is a risk of lightning.
• Do not operate the battery charger with
wet hands.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
Safety instructions for maintenance
WARNING:
instructions that follow before you
do maintenance on the product.
Introduction
This section describes how to assemble and
adjust the product.
2114 - 004 - 03.11.2023
Read the warning

Assembly

• Remove the battery before you do
maintenance, other checks or assemble
the product.
• The operator must only do the
maintenance and servicing shown in this
operator's manual. Turn to your servicing
dealer for maintenance and servicing of a
larger extension.
• Do not clean the battery or the battery
charger with water. Strong detergent can
cause damage to the plastic.
• If you do not do maintenance, it decreases
the life cycle of the product and increases
the risk of accidents.
• Special training is necessary for all
servicing and repair work, especially for
the safety devices on the product. If
not all checks in this operator's manual
are approved after you have done
maintenance, turn to your servicing dealer.
We guarantee that there are professional
repairs and servicing available for your
product.
• Only use original spare parts.
• Always use heavy duty gloves when you
repair the cutting attachment. The blades
are very sharp and can easily cause
injuries.
WARNING:
wash the machine, as water can
enter the electrical system or the
motor and cause damage to the
machine or short circuit.
SAVE THESE
INSTRUCTIONS
WARNING:
assemble the product, read the
Do not pressure
Before you
13