Maintenance; Specifications - Sony SRX-R220 Operating Instructions Manual

Maintenance

Some components of the projector are consumable parts
over a long period of use.
To keep the projector working properly and to prolong its
usable lifetime, have the projector inspected periodically.
We recommend you make a maintenance contract for
periodical inspection with us. For details on the contract,
consult with Qualified Sony Service Personnel.
26
Maintenance / Specifications

Specifications

Optical characteristics
Projection system
SXRD (Silicon X-tal Reflective Display)
3 panel system
SXRD 8,847,360 (4096 (H) × 2160 (V)) pixels
× 3
Lens Optional
Light output* SRX-R220: 14 ft-L
For a screen max. 20 m wide using a
4.2 kW lamp
For a screen max. 17 m wide using a
3.0 kW lamp
For a screen max. 14 m wide using a
2.0 kW lamp
SRX-R210: 14 ft-L
For a screen max. 17 m wide using a
3.0 kW lamp
For a screen max. 14 m wide using a
2.0 kW lamp
Lamp Optional
* When the screen gain is 1.8
Input/output
RS-232C For service use (to connect the SRX
controller)
INGEST PORT
For service use (to ingest the contents)
Input signal
DVI-D
The following signals are acceptable when the optional
interface board is installed.
HD-SDI (4:4:4/4:2:2) (SMPTE-292M)
DC-SDI (4:4:4)
For details on optional interface boards, contact Qualified
Sony Service Personnel.
General
Dimensions 740 × 1535 × 1396 mm (29
55 inches) (w/h/d)
Mass Approx. 300 kg (661 lb 6 oz) (excluding
the optional lamp and lens)
Power requirements
100 to 240 V AC, 50/60 Hz (single-phase
main power)
1 1
/ × 60 / ×
4 2