Location And Function Of Controls - Sony SRX-R220 Operating Instructions Manual

Fully integrated structure—All-in-One
Projector
The projector has the 12RU 19-inch rack built into the
pedestal, enabling all necessary equipment for digital
cinema exhibition, such as the LMT-100 Media Block.
This integrated structure simplifies the wiring and realizes
an all-in-one projector. The security of the contents is
strictly protected as all relevant devices are stored in a
DCI-compliant secure projector housing.
Optional lenses
A variety of optional lenses are available depending on the
projection distances. The LKRL-Z111C, LKRL-Z114C,
LKRL-Z116C, LKRL-Z117, LKRL-Z119 and LKRL-
Z122 zoom lenses incorporate the zoom positioning
sensor, enabling you to register the various zoom positions
in a memory. If you register the zoom positions for Cinema
Scope and for Vista Vision, you can switch between them
easily with a press of the button on the SRX controller or
Touch Panel Controller. This feature reduces distortion of
image surroundings, which is caused by a conventional
projector with an anamorphic lens, to produce sharp
images.
Trademark
"CineAlta 4K" and its logomark are registered trademarks
of Sony Corporation.
20

Location and Function of Controls

Location and Function of
Controls
Front
1
2
3
4
a 8-inch duct attachment part
Install an 8-inch duct for exhaust.
b Projector head part
Image-processing circuit and optical unit are built in.
c Ventilation hole (exhaust) (left side)
d Ventilation hole (exhaust) (left side)
e Lens cover
f Lens attachment part
Contact Qualified Sony Service Personnel for attachment
of an optional lens.
g Ventilation holes (intake) (front/right side/bottom)
5
6
7