Overall Adjustment Mode - Sony MZ-R701 Service Manual

5-8. Overall Adjustment Mode

• Configuration of overall adjustment
Overall Adjustment Mode
(Title Display)
N key
Protect switch
ON
x key
x key
Protect switch
OFF
> key
x key
x key
ENTER key
x key
END SEARCH key
x key
Test Mode (Display Check Mode)
Note: Adjust the CD first, when performing adjustment.
. key
CD Overall
Adjusting
NG item exists
All item
or x key
OK
CD Overall
Adjustment
NG
CD Overall
Adjustment
OK
N key
MO Overall
Adjusting
NG item exists
or x key
MO Overall
Adjustment
NG
MO Overall
Adjustment
OK
Electrical
Offset
Adjustment
Power Supply
Adjustment
Auto Item Feed
• Overall adjustment mode (Title display)
This set LCD display
Assy
: (Disc mark) At end power supply adjustment: Outside lit
At end of electrical offset adj.:inside lit
Note: On the set having microcomputer version 1.000, the disc
mark is displayed on the set LCD only.
: Left side = MO overall adjustment information
F : MO overall adjustment completed
1 : Manual adjustment exists (overall adj. not completed)
0 : Not adjusted
Right side = CD overall adjustment information
F : CD overall adjustment completed
1 : Manual adjustment exists (overall adj. not completed)
0 : Not adjusted
• Electrical offset adjusting method
Caution: The electrical offset adjustment must be made with no
disc loaded.
1. Make sure that the power supply voltage is 3V.
2. Set the test mode (see page 12).
[VOL --]
3. Press the . or
mode.
This set LCD display
Assy 11
[ENTER]
4. Press the key.
This set LCD display
Ofst
: Adjusted value
5. Electrical offset adjustment is over, if the following display
appears.
This set LCD display
OfstOK
MZ-R701/R701DPC
0 00
key to activate the overall adjustment
0 00
0 35
0 00
21