Adf Output Tray - Fujitsu ScanPartner 620C User Manual

2.4 ADF OUTPUT TRAY

i). Hold the output paper tray some 30 degrees aslant as shown in Figure 2-5.
ii). Insert the three protrusions on the ADF Output Tray into the three slots on the ADF.
iii). Release the paper tray gently. Make sure the tray is firmly attached to the ADF.
iv). Pull out the Extension Wire to the desired length.
Figure 2-5 Install the ADF Output Tray
Protrusions
2-7
ADF Output Tray
Extension Wire