Iomega 3798300 Owner's Manual page 22

10
Check the following items before replacing the
computer cover:
PIN 1 on the IDE interface cable matches the PIN 1 connector on
your Zip
The IDE interface cable is securely connected to all pins on your Zip
drive.
An internal power supply cable from the computer has been connected
to your Zip
Your Zip
11
Check all connections, arrange the cables to
fit under the cover, and replace the computer
cover.
12
Reconnect power cord, turn ON power switch,
and wait for the operating system to load.
13
Turn to the next page for instructions on
installing the Zip
IomegaWare
22
®
Internal drive and the motherboard.
®
drive.
®
drive has been securely mounted to your computer.
®
ATAPI driver and the
™ software.
®