Mitsubishi Electric MSZ-G09SV-E1 Service Manual page 65

OPERATING PROCEDURE
6. Removing the outdoor fan motor
(1) Remove the service panel, top panel and the cabinet.
(Refer to 1)
(2) Disconnect the connector remove the clamp of fan motor
lead wire.
(3) Remove the propeller fan nut and remove the propeller fan.
(4) Remove screws fixing the outdoor fan motor.
7. Removing the compressor
(1) Remove the service panel, top panel and the cabinet.
(Refer to 1)
(2) Remove the soundproof felt.
(3) Remove the terminal cover on the compressor.
(4) Remove the electrical assembly. (Refer to 2)
(5) Release gas from the refrigerant circuit.
(6) Disconnect the welded part of the discharge pipe.
(7) Disconnect the welded part of the suction pipe.
(8) Remove nuts fixing the compressor.
(9) Remove the compressor.
Photo 5
Set screws of the
outdoor fan motor
Propeller fan
65
PHOTOS
Lead clamps
Welded
Propeller fan parts
nut
Compressor set nuts