Brother DCP-330C User Manual page 89

Level1 Level2
LAN TCP/IP
-
(DCP 540CN
only)
Setup Misc.
The factory settings are shown in Bold with an asterisk.
82
Level3 Options
BOOT Method Auto*
Static
RARP
BOOTP
DHCP
[000-255].
IP Address
[000-255].
[000-255].
[000-255]
[000-255].
Subnet Mask
[000-255].
[000-255].
[000-255]
[000-255].
Gateway
[000-255].
[000-255].
[000-255]
Node Name BRN_XXXXXX
WINS Config Auto*
Static
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
APIPA On*
Off
Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Descriptions
Chooses the BOOT method
that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Chooses the WINS
configuration mode.
Specifies the IP address of
the primary or secondary
server.
Specifies the IP address of
the primary or secondary
server.
Automatically allocates the
IP address from the link-
local address range.
Chooses the Ethernet link
mode.
Page
See
Network
User's
Guide
on the
CD-
ROM