Cleaning The Outside Of The Machine - Brother DCP-330C User Manual

Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance when used with
genuine Brother Branded ink cartridges.
Brother cannot guarantee this optimum
performance if ink or ink cartridges of other
specifications are used. Brother does not
therefore recommend the use of cartridges
other than genuine Brother Branded
cartridges or the refilling of empty
cartridges with this machine or the refilling
of empty cartridges with ink from other
sources. If damage is caused to the print
head or other parts of this machine as a
result of using incompatible products with
this machine, any repairs required as a
result may not be covered by the warranty.
Cleaning the outside of the
machine
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Troubleshooting and Routine Maintenance
Clean the outside of the machine as
follows:
a
Pull the paper tray (1) completely out of
the machine.
b
Wipe the outside of the machine with a
soft cloth to remove dust.
B
c
Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d
Wipe the inside and outside of the paper
tray with a soft cloth to remove dust.
e
Close the output paper tray cover and
put the paper tray firmly back in the
machine.
B
1
73