Adjusting Brightness, Contrast And Colour - Brother DCP-330C User Manual

Chapter 5
d
If you do not want to change additional
settings, press Colour Start to print.
Adjusting Brightness,
Contrast and Colour
Brightness
a
Press a or b to choose Brightness.
Press OK.
b
Press a to make a lighter print or press
b to make a darker print.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Contrast
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
Press a or b to choose Contrast.
Press OK.
b
Press a to increase the contrast or
press b to decrease the contrast.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Colour Enhancement
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
Press a or b to choose
Color Enhance.
Press OK.
b
Do one of the following:
If you want to customize the White
Balance, Sharpness or Colour
Density, press d or c to choose On
and then go to step c.
40
If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c
Press a or b to choose
White Balance, Sharpness or
5
Color Density.
Press OK.
5
d
Press a or b to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
If you want to customize other colour
enhancement, press a or b to
choose other option.
If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f
5
If you do not want to change additional
settings, Colour Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
5
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.