Insert Dimensions And Specifications; Surround Options - Vermont Castings Savannah SSI30 Owner's Manual

SSI30 Wood Insert
INSERT dIMENSIONS
27 " (699 mm)
Figure 1 -
Insert Dimensions
Log Length ............................................ 20
Maximum burn time 2 ........................................10 hours
Average area heated (sq.ft)
3
Range of heat output
1
Maximum heat output
EPA emissions rating (g/h, non-catalytic) ..........3.5 gph
Weight ................................................................360 lbs
Loading ................................................................. Front
Air Control ..........................................................Manual

SuRROuNd OpTIONS

30"
(762 mm)
Figure 2 -
Surround Options
6
(521 mm)
" (508 mm)
203061
2 .......................2,200 sq. ft.
VSI30 dims
.............................11,000-30,600
........................................55,400
40" (1016 mm)
SSI30S40
20 "
1. Maximum burn times and heat outputs are based on laboratory
testing using full loads of seasoned hardwoods, and may vary
in individual use depending on how the insert is operated, type
and moisture content of fuel, and other factors. Maximum
burn times are achieved under different operating conditions
than are maximum heat outputs.
2. These values are based on operation in building code-
conforming homes under typical winter climate conditions in
the U.S. If your home is of nonstandard construction (e.g.
unusually well-insulated, not insulated, built underground,
or if you live in a more severe and more temperate climate),
these figures may not apply. Since so many variables affect
performance, consult your Vermont Castings Authorized
Dealer to determine realistic expectations for your home.
3. Under specific conditions used during EPA emissions
testing.
34"
(864 mm)
ST1064
SSI30 Surround options
SpECIFICATIONS
*14" (356 mm)
*10" (254 mm)
(559 mm)
22 " (578 mm)
* Surround Adjustment
44" (1118 mm)
SSI3044
5 " (140 mm)
22"
ST1064
63D4004