Vermont Castings Savannah SSI30 Owner's Manual page 14

SSI30 Wood Insert
blOWER ANd ASh lIp ASSEMblY
1. Attach the wires as shown in Figure 20 making sure you push all connections together tightly
2. Insert the snapstat into its holder as shown in Figure 19, making sure that the connectors are
not touching the insert.
3. Use the two bolts saved from the front shipping bracket to secure the blower to the insert.
4. Make sure all wires are away from the insert front.
5. The ash lip and surround can now be installed by placing the keyhole cutouts over the bolt heads
shown in Figure 18.
Figure 20
2
ASSEMblINg ThE SuRROuNd
To assemble the surround it is best to lay the three sec-
tions face down on a soft flat surface. The foam package
material works well for this.
Align the two pins on the top section with the holes on the
side pieces as shown in Figure 21. carefully slide the sec-
tions together. When moving the assembled surround it is
best to hold it by the sides and not the top.
14
4
8
8
Tan Tan
Tan
On
Off
3
6
1
7
Black
White
9
ST1081
SSI30 WIRING
Figure 21
INSTAllATION
5
Black
White
Detail View
ST1082
ST1082
assemble surround
63D4004