Recording, Timer Recording And Copying; Play - Panasonic DMR-BWT800 Operating Instructions Manual

Troubleshooting guide
Recording, timer recording and
copying
Cannot record.
Cannot copy.
Some broadcasts are copyright protected.
You cannot record to the disc by pressing the [REC ¥] or
timer recording.
The disc is protected with "DVD Management" or "Blu-
ray Disc Management". (
Some programmes on digital broadcast channels are
copy-restricted and the number of times you can copy in
DR, HG, HX, HE, HL, HM mode is assigned by the
broadcaster.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there is
insufficient available capacity on the HDD.
Delete unnecessary titles on the HDD. (
You cannot copy on finalised discs.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Copying or editing
may not be possible on these discs after ejecting and
loading the disc or turning the unit on/off for
approximately 30 times after being copied to.
Discs recorded on equipment other than this unit may not
be able to be recorded to.
This unit cannot copy NTSC signals to discs that already
have PAL signal recordings.
Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Cannot record from external equipment.
Check that the connection and input channel is correct.
( 13)
Timer recording does not work properly.
Refer to "Notes on timer recording". (
A part or whole of a recorded title has been
lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc
may become unusable.
We cannot offer any guarantee regarding lost
programmes or discs.
An unusually loud sound is coming from the
rotating disc.
If you want copy to perform more quietly, select "Normal
( Silent )" in "BD / DVD Speed for High Speed Copy".
( 82)
98
VQT3C14
68)
44)
34)

Play

Cannot playback.
The disc is dirty, scratched or marked. (
You tried to play a +RW that needs to have a Top Menu
on the equipment used for recording.
You cannot playback while executing the "Flexible
Recording via AV input".
[BD-R] [BD-RE]
Set "Play Video ( AVCHD ) on BD-RE / BD-R" to "On"
and the playback may be possible (
The disc that is recorded by using other equipment and
not finalised may not be able to playback.
Audio and video momentarily pause.
[-R]DL] [+R]DL] When playing a title recorded on both
layers, the unit automatically switches between layers
and plays the title in the same way as a normal
programme. However, video and audio may momentarily
cut out when the unit is switching layers.
BD-Video or DVD-Video is not played.
You have set a rating level. (
Control, DVD-Video Parental Control)
Ensure the disc is for the correct BD-Video region code
or DVD-Video region number, and is not defective.
[BD-V] You cannot playback while recording from external
equipment.
You have forgotten your rating PIN.
You want to cancel the rating level.
The rating level returns to the factory preset. While the
disc tray is open, press [DRIVE SELECT] to select the
BD drive, then press and hold [REC ¥] and
[PLAY/a1.3 1] on the main unit at the same time for 5 or
more seconds ("INIT" will appear on the unit's display).
Image for the Quick View is not smooth.
Image may not be played back smoothly in case of DR,
HG, HX, HE, HL, HM mode titles, AVCHD format titles or
BD-Video.
This function does not work when recording is in XP or
FR mode.
The resume play function does not work.
Memorized positions are cancelled when
– open the disc tray.
– [CD] [SD] [USB] turn off the unit.
([HDD] will not be cancelled)
This function does not work for some BD-Video disc that
contains BD-J.
103)
81).
81, BD-Video Parental