Table of Contents
Advertisement
Main unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
2 Disc tray (
18)
3 Blue LED
≥It is possible to set the LED to turn on/off. (
4 Recording indicator
≥The indicater will light up while recording.
≥The indicator will blink while recording is paused.
5 CALL LED
≥The LED will light up when this unit receives incoming
call etc. of the video communication. (
6 Remote control signal sensor
– Angle: Approx. 20° up and down, 30° left and right
– Distance: Within approx. 7 m in front of the unit
7 Open/close disc tray (
8 USB port (
18)
9 SD card slot (
18)
: [BWT800] HDMI (SUB) V.OFF LED (Video off LED)
≥It is possible to set the LED to turn on/off. (
; Channel select (
24)
< Start recording (
28)
= Stop
> Start play
18, 20)
85)
71)
18)
85)
Pull to flip down the
front panel.
? Display
HDDSD
BD
4
5
1 SD card slot indicator
2 Copying indicator (
3 Disc indicator
4 Drive (HDD, BD or SD) indicator
5 Remote control signal indicator
6 Main display section indicator
Current time/playback counter, various messages
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
Rear panel terminals (
1
SD USB
PLAY
6
7
47)
12–17)
2
3
COPY
8
9
11
VQT3C14
Advertisement
Table of Contents
