Operation During Recording - Panasonic DMR-BWT800 Operating Instructions Manual

Blu-ray disc recorder
Hide thumbs Also See for DMR-BWT800:
Table of Contents

Advertisement

To set the recording time
1 Select "Recording Time" or "Continuous recording" in
step
on page 28.
Recording
You can set the length of recording
Time
time from 30 minutes to 4 hours.
Select the recording time.
≥You can also set the time with
[REC ¥].
Continuous
The recording is continued until you
recording
press [STOP ∫].
2 Press [OK].
∫ Recording mode conversion
Conversion is performed when the unit is turned off.
To confirm whether the conversion is completed
(
47, To confirm whether the conversion is
completed)
To cancel a conversion (
standby" conversion)
≥ The title before conversion (the title recorded in DR mode) will be
deleted once the conversion is completed.
≥ When the HDD does not have enough remaining time, conversion
will not start.
≥ This function is stopped when this unit is turned on. Conversion will
start from the beginning again once the unit is turned off.
≥ When converted, audio track, multi channel audio and subtitle will
be converted with the same settings as at the start of recording.
To convert the recording mode after recording in DR
mode (
47)
Recording from external equipment (
Recording modes and approximate recording times
(
110)
≥ One recording will terminate when simultaneous recording is being done
and timer recording starts.
≥ When "Automatic Standby after OTR" is set to "On" (
turned to standby mode if this unit is not operated for approximately
5 minutes after completing "Automatic Stop" or "Recording Time" (
47, To cancel a "During
66)
89), this unit is
28).

Operation during Recording

To check the recording programme
Press [STATUS
].
e.g., While recording 2 programmes simultaneously
HDD
Recording programme displayed on
REC1/OTR AUTO
the TV
Recording programme not displayed
REC2
on the TV
To switch the Channel
Press [CH W X].
To switch the Input
Press [INPUT SELECT].
To display the recording programme
on the TV
It is necessary to display the recording programme onto the
TV screen to perform operations such as pause.
Press [CH W X] or [INPUT SELECT] to select
the recording channel.
29
VQT3C14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-bwt700

Table of Contents