Others - Panasonic DMR-BWT800 Operating Instructions Manual

Others

Others
Standby Settings
Remote Control
Clock
Setup
PIN Entry
System Update
System Information
DivX Registration
Initialize
Others
∫ Standby Settings
Others
Standby Settings
Standby Settings
Power Save in Standby
Automatic Standby
Automatic Standby after OTR
Automatic Standby after Copy
RF OUT ( Aerial Signal )
Power Save in Standby
On It will go into the "Power Save in
Standby" mode.
On Timer "Power Save in Standby" is activated
when the set time comes.
≥If the clock has not been set, "Power
Save in Standby" is activated at all
hours.
Off It is possible to start quickly from the
standby mode. (Quick Start mode)
≥This function cannot be enabled when the DLNA
function is enabled in "Home Network ( DLNA )
Server Settings". (
≥The setting may be changed to "Off" automatically
when the setting for video communication is changed.
( 71)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
After the unit has finished operating, the unit will be
turned to standby mode once the set time has passed.
≥When "REWIND LIVE TV" is set to "On"(
cannot be selected.
Enlgish
Enlgish
Enlgish
88)
82), "Off"
Automatic Standby after OTR
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing "Automatic Stop" or "Recording Time"
( 28).
Automatic Standby after Copy
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (
RF OUT ( Aerial Signal )
Set whether to output the aerial signal or not from RF
OUT while in standby mode (when "Power Save in
Standby" is activated).
≥If "On" is selected, the aerial signal is output from this
unit.
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use "BD 1", the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote controls
with "IR6" printed at the bottom when the remote control
code of this unit is set to "BD 4", "BD 5" or "BD 6".
BLU-RAY DISC RECORDER
BLU-RAY DISC RECORDER
IR6
50, 51).
IR6
IR6
VQT3C14
89