Table of Contents
Advertisement
Configuring Serial Adapter
1
Set baud rate
Set the Baud rate on the Serial adapter to 9600 (see table 1 on page 9)
2
Plug in
Plug the Bluetooth serial adapter to an available serial port on your computer (Do NOT
power on the serial adapter yet).
3
Open Hyper Terminal
Open HyperTerminal (Go to Start
desired name for your hyperterminal session. If the program does not launch, you may
have to install it from your Windows installation disc.
Advanced Configuration
Run, and type "hypertrm") and enter any
23
Advertisement
Table of Contents
