Table of Contents
Advertisement
8
Plug in
You may now connect each adapter to your desired serial device for communication. After
powering back ON both serial adapters, the blue LED will blink on both serial adapters
indicating connection is in progress; which usually takes about sixty (60) seconds
9
Finished
After successful connection is made, the blue LED on both serial adapters will turn off and remain
Note: Once you have paired both Bluetooth serial adapters, if you turn them off, please
allow approximately sixty (60) seconds when turning them back on to re-establish a
connection.
Method 3 – HyperTerminal Pairing
<Please see page31 on Appendix A>
21
Basic Configuration
Advertisement
Table of Contents
