Voltage Selector Switch Location - Dimplex BFSL33 Installation Manual

VOLTAGE SELECTOR SWITCH LOCATION

!
IMPORTANT: Ensure that the incoming power supply voltage matches the
setting of the voltage selector switch.
!
NOTE: The voltage selector switch is located inside the exhaust panel on
the top right hand corner.
CAUTION: When changing the voltage selector switch from 240V to 120V
ensure that the power supply is turned off.
!
NOTE: Carefully insert a flat headed screwdriver inside the exhaust panel
to change the switch from 240V (230 position) to 120V (115 position).
When wiring the unit for 208V / 240V the voltage selector switch should be in
the 230V position.
When wiring the unit for 120V the voltage selector switch should be in the
115V position.
6
www.dimplex.com