Joystick; Preset Effects - Datavideo SE-900 Instruction Manual

Digital video switcher

Hide thumbs Also See for SE-900:

Table of Contents

Joystick

The Joystick is used in conjunction with several features. It is used to adjust the RGB colour settings of the

video inputs, and to position mosaic or PIP effects.

Used to set RGB colour correction and to position PIP and Mosaic effects

RGB - (Red / Green / Blue) sets the Joystick to colour correction mode for Video Input setting

POS CNTL - Position Control sets the Joystick to positioning mode for PIP and Mosaic effects

You can program up to ten of your favourite effects or transitions on to the F1 to F10 keys; once

programmed they are available at the press of a button. The Preset Effects can also be run as an automatic

sequence by using the GPI Take Key to trigger each Preset in turn.

Table of Contents