Optional Brick Panel Installation; System Check - Jøtul GF300 DV IPI Allagash Installation And Operation Instructions Manual

Direct vent gas heater
Table of Contents

Advertisement

139495_Rev_C GF 300 DV IPI 9/11/12
CAUTION!
THE BRICK PANELS ARE FRAGILE. SUPPORT
THE PANELS WITH BOTH HANDS AND HANDLE
WITH CARE.
Upper Panel
Left Panel
224929
Lower Panel 224927
Figure 31 Panel kit components.
NOTE: BE SURE TO INSTALL THE PROPER BURNER SKIRT
EXTENSIONS OR AIR GUIDES BEFORE INSTALLING THE
BRICK PANELS.
1. Install the Lower Panel.
Position it up against the back wall, resting on the
burner skirt. Fig.32.
2. Bend the retainer tab out slightly from each side of the
firebox. See fig. 33. Set one side panel in place and bend
the retainer tab down to secure the panel.
Set the Upper Panel on the Lower Panel, so that the
mortar joints align with those on the adjacent panels.
Hold it in place while setting the opposite Side Panel
against the wall. Fig. 34.
3. Adjust the Upper Panel. You should seat the Upper
Panel down and forward so that no gaps are evident at
the panel joints, as indicated by the arrows in Fig. 34.
20
224928
Right Panel
224930
Burner Skirt
Figure 32. Install the Lower Rear Panel.
Figure 33. Secure the Side Panel with the tab.
Figure 34. Install the Upper and Side Panel.
Retainer Tab

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents